CV Joints and boots

Posted October 8th, 2010 by admin

Inner CV joint
VW No. – 183 498 103 

Dimensions.
OD – 100mm
Depth – 32mm
Spines – 25
PCD 6x86mm
Bolt hole dia. – 8.5mm
Plunge measurement – 32mm

Aftermarket Part Numbers.

GKN Part no (kit) – 21561
Loebro kit no – 301142
GKN Motorsport no – MS3K023*
SKF – VKJA8688
*These kits contain no boots, this is just a bare joint.
Kits supplied with boot have the wrong shaft diameter, Iltis has a 28mm shaft, supplied boot is to suit 22mm shaft.
This joint is usually found on Ford Granada, Scorpio and Consul models.

Outer CV Joint kit
VW No. – 183 498 099

Dimensions.
Height – 146.5mm
Thread – M22x1.5
Outer splines – 26
Oil seal surface diameter – 56.5mm
Oil seal surface to end of thread – 84.5mm
Large end diameter – 90mm
Internal splines – 25

VW Numbers
431 498 099 A (Obsolete)
431 498 099 AX (Exchange item – Obsolete)
803 498 099 A (Obsolete)

Aftermarket part numbers
GKN Spidan – 20271
Loebro – 301047
SKF – VKJA5258
Meyle – 100 498 0100
Vaico – V10-7285

Again, the boot supplied is incorrect for the Iltis application, supplied boots are for 22mm shafts, the Iltis has a 28mm shaft, they may work but technically they are incorrect.

Inner CV boot
VW No. – 183 498 201
Alternative VW No. – 803 407 283 C
Loebro No. – 2153157500003 (number taken directly from original boot so 100% correct)
This does not cross over to a GKN Spidan part number and is only supplied as a boot – no clips!
Dimensions. 25mm shaft, 81mm tall,62mm wide.

Outer CV Boot
VW No. – 183 498 203
Alternative VW No. – 431 498 203 C
Alternative VW No. – 443 498 203 B
GKN Spidan part number – 26007

Dimensions – 78mm tall, 22mm shaft, 82mm CV joint end.

 

2 Responses to “CV Joints and boots”

  1. Anthony Garne

    Thank you, been driving on a bad CV joint here in Florida for 6 months! Now I have some part nubers to throw out! Thanks again!

  2. admin

    Sorry it took so long to reply, been very busy, not had much time for going through the reams of spam this blog generates.
    if you get stuck for CV joints let me know as we have them on the shelf!
    🙂